Difference between revisions of "Jerrycan"
(→Russian usage: engvar)
m (1 revision imported)
Latest revision as of 11:28, 14 December 2021
A jerrycan (also written as jerry can or jerrican) is a robust liquid container made from pressed steel. It was designed in Germany in the 1930s for military use to hold 20 litres (4.4 imp gal; 5.3 US gal) of fuel. The development of the jerrycan was a significant improvement on earlier designs, which required tools and funnels to use, and it contained many innovative features for convenience of use and robustness. After widespread use by both Germany and the Allies during the Second World War, today similar designs are used worldwide for fuel and water containers, some of which are also produced in plastic. The designs usually emulate the original steel design and are still known as jerrycans. The original design of jerrycan and various derivatives remain in widespread military use.
The cans were originally intended to be used as fuel containers, but uses for the cans have expanded beyond this. Today, a can's use is denoted by its colouring, affixed labels and, occasionally, imprinted labelling on the container itself. This is to prevent contamination of the can's contents by mixing different fuels or mixing fuel with water.
The US version of the jerrycan is covered by military specification MIL-C-1283 F and has been produced since the early 1940s by a number of US manufacturers, according to a current manufacturer, Blitz. The National Stock Number is 7240-00-222-3088. It is considered obsolete by a new A-A-59592 B specification, having been replaced with high-density polyethylene versions.
Jerrycans typically have a rounded rectangular cross section with package handles. Most have three handles: a center handle for one person carrying a lightweight can, two handles for a person lifting a full can, or two handles for two people to carry. The configuration of the three handles allows two empty jerrycans to be carried in one hand.
The name of the jerrycan refers to its German origins, Jerry being slang for Germans. The design was reverse engineered and subsequently copied, with minor modifications, by the Allies during the Second World War.
The Wehrmacht-Einheitskanister, as it was known in Germany, was first developed in 1937 by the Müller engineering firm in Schwelm to a design by their chief engineer Vinzenz Grünvogel. A similar design was used in 1936 during the Spanish Civil War, where they had a company logo for Ambi-Budd Presswerk GmbH. Among others, the Wehrmacht had specified that a soldier should be able to carry either two full containers or four empty ones, which is the reason the triple handles were fitted. To achieve the required filling and draining speed, it was fitted with a large spout and flip top closure. A hole in the closure retainer made it possible to fit a securing pin or wire with a lead seal. The rectangular shape made it stackable. The recessed welded seam stiffened the container and protected the seam from impact damage. The indentations ensured a full can would not be severely damaged when falling from a vehicle, while a dip coat of paint on the inside protected it from corrosion.
By 1939 the German military had thousands of such cans stockpiled in anticipation of war. Motorised troops were issued the cans with lengths of rubber hose in order to siphon fuel from any available source, a way to aid their rapid advance through Poland at the start of the Second World War.
In 1939, American engineer Paul Pleiss had built a vehicle to journey to India with his German colleague. After building the car, they realised they did not have any storage for emergency water. The German engineer had access to the stockpile of jerrycans at Berlin Tempelhof Airport and managed to take three of them. They drove across 11 national borders without incident until Field Marshal Göring sent a plane to take the engineer home. The German engineer also gave Pleiss complete specifications for the manufacture of the can. Pleiss continued on to Calcutta, put his car in storage, and flew back to Philadelphia, where he told American military officials about the can. He could raise no interest. Without a sample, he realised he could not get anywhere. He eventually shipped the car to New York by a roundabout method, and sent a can to Washington. The War Department decided instead to use World War I ten-US-gallon (38 l; 8.3 imp gal) cans with two screw closures, which required both a spanner and funnel for pouring.
The one jerrycan in American possession was sent to Camp Holabird, Maryland, where it was redesigned. The new design retained the handles, size and shape, but is most easily distinguishable from the German original by the simplified 'X' - stiffening indentations in the sides of the can. The US can could be stacked interchangeably with German or British cans. The German recessed welded seam was replaced with rolled seams which were prone to leakage. For fuel cans, the lining was removed and a spanner and funnel were required. A similar water can was also adopted, with a flip-top lid and enamel lining.
The US-designed jerrycan was widely used by US Army and Marine Corps units. In all overseas theaters, fuel and other petroleum products represented about 50% of all supply needs, measured by weight. In the European Theatre of Operations alone, over 19 million were required to support US forces by May 1945.
The jerrycan played an important role in ensuring fuel supply to Allied operations. A single standard US 2.5 ton truck could carry 875 US gallons (3,310 l) of fuel loaded in jerrycans. US logisticians requested over 1.3 million per month to replace losses; these cans were provided by US and British manufacturers, but supply could not keep up with demand. Loss of jerrycans in units was severe, with 3.5 million reported 'lost' in October 1944, for example. At one point in August 1944, lack of cans (caused by losses) limited the supply of fuel that could be brought forward to combat units, even though the fuel was available in rear areas.
The US design was slightly lighter than the German can (10 pounds (4.5 kg) vs. 11.5 lb (5.2 kg) for the German version). These fuel containers were subsequently used in all theatres of war around the world. Such was the importance of the cans in the war effort that the President Roosevelt administration noted "Without these cans it would have been impossible for our armies to cut their way across France at a lightning pace which exceeded the German Blitzkrieg of 1940."
At the beginning of the Second World War the British Army was equipped with two simple fuel containers: the 2-imperial-gallon (9.1 l; 2.4 US gal) container made of pressed steel, and the 4-imperial-gallon (18 l; 4.8 US gal) container made from tin plate. The 2-gallon containers were relatively strong, but were expensive to produce. Manufactured primarily in Egypt, the 4-gallon containers were plentiful and inexpensive, but they had a tendency to leak after minor damage. Early 4-gallon containers were packed in pairs in wooden cases. When stacked, the timber framing protected the tins and prevented the upper layers of tins from crushing the lower. As the war progressed, the wooden case was replaced with either thin plywood or cardboard cases, neither of which provided much protection. 4-gallon containers carrying fuel were hazardous to the cargo ships carrying them. The leaking fuel would accumulate in cargo holds. At least one such ship exploded.
Though adequate for transport along European roads, the 4-gallon containers proved extremely unsatisfactory during the North African Campaign. The crimped or soldered seams easily split during transport, especially off road over the rock strewn deserts of North Africa. In addition, the containers were easily punctured by even minor trauma. Because of these problems the troops referred to the 4-gallon containers as flimsies. Transport of fuel over rough terrain often resulted in as much as 25% of the fuel being lost through seam failures or punctures. Fuel leaks gave vehicles a propensity to catch fire. The containers were routinely discarded after a single use, and severely hampered the operation of the British Eighth Army. A more successful and popular use for the 4-gallon container was to convert it into a cooking stove, referred to as the 'Benghazi burner'.
British tin plate, 4-imperial-gallon (18 l) petrol tin ("Flimsy"). Inexpensive, but weak, with a tendency to leak
When the British Army first saw the German fuel cans during the Norwegian Campaign in 1940, they immediately saw the advantages of the superior design. The three handles allowed easy handling by one or two people, or movement bucket brigade-style. The handle design also allows for two empty cans to be carried in each hand, utilizing the outer handle.
The sides of the can were marked with cross-like indentations that strengthened the can while allowing the contents to expand, as did an air pocket under the handles when the can was filled correctly. This air pocket allowed the container to float if dropped in water. Rather than a screw cap, the containers used a cam lever release mechanism with a short spout secured with a snap closure and an air-pipe to the air pocket which enabled smooth pouring (which was omitted in some copies). The interior was also lined with an impervious plastic, first developed for steel beer barrels, that would allow the can to be used for either water or petrol. The can was welded and had a gasket for a leak-proof mouth.
The British used cans captured from the "Jerries" (Germans) – hence "jerrycans" – in preference to their own containers as much as possible. Later in 1940, Pleiss was in London and British officers asked him about the design and manufacture of the jerrycan. Pleiss ordered the second of his three jerrycans flown to London. After the second capture of Benghazi at the end of 1941, large numbers of Axis jerrycans were captured, sufficient to equip some units such as the Long Range Desert Group.
The strength of the Wehrmachtskanister was also recognised in the Soviet Union. Its design was later copied and the Soviet Army accepted it as the standard container for liquids. This container is still being produced and used in modern Russia. In civilian use this container is used primarily for automotive fuel and lubricants.
The German design jerrycan is still a standard container for fuel and other liquids in the armies of the NATO countries.
Finnish designer Eero Rislakki designed a plastic jerrycan in 1970 with a small screwable stopper on the top side behind the handle to allow air flowing in to ensure smooth fuel outflow. It is lighter than the original design yet almost as sturdy. It was quickly adopted by the Finnish armed forces, and is commercially available.
Current US regulations
The Jerrycan is defined by the Code of Federal Regulation, 49 CFR 171.8 as "a metal or plastic packaging of rectangular or polygonal cross-section".
- They must meet new federal Mobile Source Air Toxic regulations, based on the California Air Resources Board's regulations.
- They must meet the requirements of the Children's Gasoline Burn Prevention Act.
These new regulations do not apply to OSHA-approved metal safety containers, but rather to the common red plastic, portable gas cans. The regulations apply only to newly manufactured petrol cans, and there is no requirement on the part of users to discard their existing cans or to upgrade, although the EPA provides informational resources for implementing community Gas Can Exchange Programs.
Furthermore, in the state of California, the following colours are mandated:
- a) Gasoline – red;
- b) Diesel – yellow; and
- c) Kerosene – blue.
Current European regulations
The transportation of dangerous goods (which includes liquid fuels) within Europe is governed by the UN European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR). The term "jerrican" is defined within Chapter 1.2 of the 2011 ADR as "a metal or plastics packaging of rectangular or polygonal cross-section with one or more orifices", a definition which includes the traditional jerrycan but which also covers a wide range of other packagings.
The ADR sets performance standards for packaging and specifies what standard of packaging is required for each type of dangerous good, including petrol and diesel fuels. The traditional jerrycan is available in UN-marked approved versions which satisfy the requirements of the ADR.
- Defense Logistics Agency. "Can, Gasoline, Military 5-Gallon (S/S by MIL-C-53109)". Defense Logistics Agency. Retrieved 14 August 2019.
- Wave Media Technologies Inc. "History". Blitz USA. Archived from the original on 7 February 2007. Retrieved 3 August 2010.
- Defense Logistics Agency. "Can, Fuel, Military: 20-Liter Capacity". Defense Logistics Agency. Retrieved 14 August 2019.
- "definition and etymology of "jerrycan"". Dictionary.reference.com. Retrieved 15 April 2012.
- "jerry". Origin and meaning of jerry by Online Etymology Dictionary. Retrieved 17 April 2019.
- "The Amazing Jerry Can". Think Defence. 1 August 2012. Retrieved 27 August 2013.
- "Pre-series 1936 / series 1937". 3 April 2015. Retrieved 1 August 2015.
- Richard M. Daniel (1987). "The Little Can That Could". Invention & Technology Magazine. AmericanHeritage.com. 3 (2). Archived from the original on 24 May 2007.
- "Logistical Support of the Armies" (PDF). Retrieved 3 August 2010.
- Kennedy Shaw, W.B. (1945). Long Range Desert Group. London: Collins. pp. 50–51.
- Norris, John (2012). World War II Trucks and Tanks. History Press. ISBN 9780752490731.
- "Steel containers for automotive fuel and lubricants (in Russian)". Molot.biz. Archived from the original on 7 September 2012. Retrieved 15 April 2012.
- "49 CFR 171.8 - Definitions and abbreviations". www.gpo.gov (in English). Retrieved 5 February 2018.
- Patrick White (January 2009). "Can Your Can Do This? New regulations for portable fuel containers". Turf Magazine. Archived from the original on 16 August 2014. Retrieved 3 July 2012.
- "Regulatory Announcement: Control of Hazardous Air Pollutants from Mobile Sources | Overview: Pollutants and Programs | US EPA". Epa.gov. Retrieved 3 August 2010.
- "Global Legal Information Network". Glin.gov. Archived from the original on 29 February 2012. Retrieved 3 August 2010.
- "Gas Cans | Improving Air Quality in Your Community | US EPA". Epa.gov. 28 June 2006. Archived from the original on 24 March 2009. Retrieved 3 August 2010.
- California Air Resources Board (22 July 2005). "Certification Procedure 501 For Portable Fuel Containers And Spill-Proof Spouts" (PDF).
- American Society for Testing and Materials (2008). "ASTM F852-08: Standard Specification for Portable Gasoline Containers for Consumer Use". doi:10.1520/F0852-08. Cite journal requires
- "ADR 2011 (files) – UNECE". Live.unece.org. 1 January 2011. Retrieved 15 April 2012.
|Wikimedia Commons has media related to Jerrycans.|